TY  - UNPB
ID  - pittir19352
UR  - http://d-scholarship-dev.library.pitt.edu/19352/
A1  - Sanchez, David V.P.
Y1  - 2013/09/25/
N2  - In this thesis, I deploy sets of electrodes into microbial fuel cells (MFC), characterize their performance, and evaluate the influence of both platinum catalysts and carbon-based electrodes on current production. The platinum work centers on improving current production by optimizing the use of the catalyst using nano-fabrication techniques. The carbon-electrode work seeks to determine the influence of the bare electrode on biofilm-anode current production. 

The development of electrodes for MFCs has boomed over the past decade, however, experiments aimed at identifying how catalyst deposition methods and electrode properties influence current production have been limited. The research conducted here is an attempt to expand this knowledge base for platinum catalysts and carbon electrodes. In the initial chapters (4 and 5), I discuss our attempt to decrease catalyst loadings while increasing current production through the use of platinum nanoparticles. The results demonstrate that incorporating platinum nanoparticles throughout the anode and cathode is an efficient means of increasing MFC current production relative to surface deposition because it increases catalyst surface area. 

The later chapters (chapters 6 and 7) develop an understanding of the importance of electrode properties (i.e. surface area, activation resistance, conductivity, surface morphology) by electrochemically evaluating well-studied anode-respiring pure cultures on different carbon electrode architectures. Two different architectures are produced by using tubular and platelet shaped constituent materials (i.e. carbon fibers and graphene nanoplatelets) and the morphologies of the electrodes are varied by altering the size of the constituent material. 
 
The electrodes are characterized and evaluated in MFCs using either Shewanella oneidensis MR-1 or Geobacter sulfurreducens as the innoculant because their bioelectrochemical physiologies are the most documented in the literature. Using the electrochemical results, the electrode characterizations and previous studies on their physiology I am able to extrapolate that it is the difference in the electrode morphology that significantly alters current production. For the carbon fiber, smaller constituent materials create a tighter mesh and spacing that is more amenable to biofilm colonization and increases current production. In the second experiment, the larger graphene-nanoplatelet constituents provided a morphology that better promoted biofilm-growth, after the initial colonization, which enabled significantly higher current production. 

KW  - microbial fuel cells
KW  -  bioelectrochemical systems
KW  -  electrode materials
KW  -  nano-electrodes
KW  -  biofilm-electrodes
TI  - Understanding the Influence of the Electrode Material on Microbial Fuel Cell Performance
EP  - 154
AV  - public
ER  -